How to reset v-chip password on a mitsubishi tv with a universal remote?

in

When I search I see people saying to use 9+ QV button but this remote doesn't have a QV button. Its an RCA universal remote, is there some other button for a QV button? Does anyone know how to reset the v-chip password? My mom bought this t.v from some random person, doesn't know the old password. She already tried resetting the TV. Any help would be appreciated! Thanks!

Answer: 
what is its model?

How to make an RCA universal remote work?

in

I have two TV's in my room and one of them already has a universal remote, and the other one I found so It didn't come with a remote and doesn't have a power button (hence the reason why I bought another remote) I don't understand this whole code thing, whenever I try numbers it starts turning my other Tv off and stuff? Should I unplug the other Tv and then try this? My Tv I want to configure is a Philips Magnavox, can anyone help me? Thanks

Answer: 
The codes are used to make a "universal" remote transmit the command signals required by a specific model of TV (or whatever other device). Universal remotes have hundreds, if not thousands, of control signals programmed into them. The user (you) needs to tell the remote which set of commands to transmit. Follow the instructions for the remote carefully. >> Different remotes, even of the same brand, frequently have different setup procedures, so keep the manual handy! >> Many people mistakenly believe that TVs and other things are "programmed" to the remote. This is the exact opposite of the real situation.

How to program different dish tv remote to the receiver?

in

My original tv remote got ruined because the battery exploded inside so it no longer works. I already programmed a different remote to the tv but I can't change channels. Only the volume and turn it off and on. How can I program it to the receiver? Please help! Thanks! Please know that I'm using DISH.

Answer: 
Make sure youe reciver is turned on Green power lite should be visible Turn on TV1 Press system infon buttonon the recievers front panel then do the folowing for each remote Point the TV1(green tab) remote control at the reciever press and release the SAT button Press and release the Record Button then it should work if not log in to DISH.com and click on help recentl replaced my remote

How to connect my small tv to external speakers?

in

I have just purchased a 22inch supermarket brand tv for my bedroom. Quality is generally ok but sound is a bit tinny. I would like to connect it to external speakers but the only audio output is a small 3.5mm headphone socket. Can this be connected to some sort of sound system?

Answer: 
The audio amplifier in a TV is only designed and intended for powering the set's internal speakers. You can't use it with external, unpowered speakers. Normally you would connect the TV to an external amplifier-speaker system using a connection on the back panel put there for the purpose, either a pair of rad/white auxiliary audio output jacks or a digital (optical) audio jack. Apparently, your TV has neither, so your options are next to zero. You might consider a wireless headphone set, which you could connect to your existing headphone jack. Other than that, adapting the headphone jack for use with an external amplifier is possible but involves some non-standard inventiveness on the part of someone who understands impedance matching. You can't simply connect the headphone output to an amplifier input. Per the other answer about changing out a headphone jack on a small TV--the challenge is grossly understated, and even if you could do it, you'd have the impedance matching problem mentioned above. It would be a miserable task that could avail you nothing.

How to make TV automatically switch to av2 when switching it on?

in

I have an LG TV and a HD PVR. The PVR is programmed to work on my TV av2 channel, but whenever I turn off and put the TV back on, the TV goes back to channel 1. Is it possible for me to change the settings of the TV to make it automatically be on av2 when I switch it on and how? Thanks

Answer: 
if you have some knowledge on electronics.....you may design a circuit ........when video signal comes to av2 input, a command voltage ( usually 5 volts ) goes to switching av IC so activate it on av2 .

Easiest way to watch the cartoon titled “How to train your dragon” in 3D?

in

Hello everyone!
I honestly need your kind assistance please. I just bought my latest Samsung 3D HDTV set and I wanted to watch the cartoon titled “How to train your dragon” in 3D. Funny enough, I have tried several times but it seems complicated and time consuming even when using the remote control. Is there any easiest way please?

Answer: 
More info would help,I have the newest samsung 3D 2012 E8000 series TV.You didnt say how your trying to watch it,simply you need a 3D source,if you are watching on cable its 2D,if you have a blu ray with 3D and a 3D copy of the movie its simple.Either way Samsung is active shutter full 1080P 3D.You have a button on bottom right side of remote clearly marked 3D,hit that and choose your 3d type 2D/3D conversion/3D SBS?or 3D T&B.and press the one you have that matches your source i.e blu ray etc and press and hold button on top of glasses for 3 seconds a pop up will say glasses connected to TV.To get the best 3D effects on new Samsung or any other you need a good naitive 3D source like blu ray or a downloaded 3d format and a HDMI cable also.The manual shows the proper way for you as only you know what way your watching.Like I said you can make anything 2D into 3D but iit defeats the purpose.

How to connect a newer dvd player to an older tv?

in

I have a 1996 quasar tv with a built in vcr player. It has a place for the yellow and white auxiliary cables (or whatever they're called), but when i hooked in a $40 magnavox dvd player to it, i can't get it to show up on my tv! I've tried every button on my remote plus buying a universal remote, but the only thing wrong with the universal remote is that i can't get it to connect to my tv! HELP!

Answer: 
buy an RF MODULATOR from home depot,some place lake that,plug it in,turn tv to ch 3 or 4, click the back of modulator to same number,plug in dvd player to tv

How to tune into my digital cable?

in

I have a basic digital cable connection, when hooked up to my TV has several channels. However, a lot of the channels are channel have several channels within them (eg 43-102). Is what kind of equipment should I purchase in order to tune into the channels with a decent interface (like an guide screen, etc).

Thank you!

Answer: 
Those are unencrypted digital channels on basic cable that the cable company has not yet moved to their digital-only packages that require a set top box. They will eventually, so don't get too accustomed to them. You are seeing them because your TV has an optional QAM tuner. Without it, you'd be getting the basic analog channels only. There is no guide for QAM channels. You'll find on some of them that the channel number changes from day to day, even hour to hour.

How to watch 1080p from WD HDD with Firewire800 and eSATA with a Full HD Led TV ?

in

My HDD has eSATA and firewire800.
My tv has USB and HDMI.
Can I watch my 1080p videos as they are?
With a cable maybe?

Answer: 
Either you need to buy a media player that accepts eSata or firewire, use a computer to play videos on the TV, or get a usb hard drive or just a usb enclosure for your hard drive (which would require taking it out of the current enclosure). I actually did the latter when my Lacie hard drive's enclosure started taking forever to warm up.

How to get my satellite tv in the house to a shop?

in

I want to get my satellite tv out to my shop that is roughly 300 ft from my house. I have cat 5 buried from the shop to the house now. I would like something that I could run through the cat 5 or possibly wirelessly, watch tv, and be able to change the channel.

Answer: 
Sling Box or just run RG6

Syndicate content