How to find a buddy to go redneck hunting with?

in

I've tried cragislist, but haven't had much luck. I don't understand why it's so difficult to find someone to go hunt rednecks in the forest with. Can you give me any ideas here? Thanks a ton.

Answer: 
Find out when deer season is....plenty of rednecks out then. Sit in the woods and wait... they way be hard to spot because of their redneck camo gear....but you may get lucky with the ones who wear bright orange. They will not be a challenge but hey...you didn't say you wanted one.

How to make a bow and arrow completely from nature?

in

I have an assignment for school that says I need to make a weapon completely out of nature. (history class) I'm not allowed to make a spear so I thought I'd make a bow and arrow. But how will I do that? What can I substitute for the stretchy part?

Answer: 
Be prepared now for the best advice you will get here. Ok, so making a bow is not that hard. The best wood for bow-making is osage orange (what the indians called bow would, so that should tell you something.) The bow string from natural fibers is going to be difficult. I have no idea how you can accomplish that. But now THIS is what you want to do my friend. Makd a weapon called an "atlatl". It would be easier to make than a complete bow and arrow set, and you can accomplish this task with just a good quality Swiss Army knife (I'd use more sophisticated hand tools to do a better job though). Atlatl weapons had been used by ice age people. It is thought that they were also responsible for the eventual extiction of the wooly mamouth. CAUTION! Once you build your atlatl, use it with great care. They are not toys. I've seen videos of simple atlatl "darts" that have penetrated car doors. Footnote: If I needed to survive in the wilderness for any length of time and I did not have a firearm or a bow with me. I would build an atlatl and use it to hunt for food.

How to clean deer skull for mounting at home?

in

I want to mount a skull of a buck. I want to do this at home. What methods are there to get everything out and bleach the bones. Would putting it in a plastic box of dirt and earth worms work or in a plastic box of maggots work. Please let me know how to do this.

Answer: 
Well earth worms do not eat meat, maggots would but the lack of air in a plastic bag would kill them all and cause rotting. First, find a big ant pile and put it on there for a few days, they will clean of the majority of the meat. Make sure you remove as much of the meat as possible prior to do doing this. After, boil it with about a cap of bleach, done.

How to put a flash-hider on a Mossberg International 715T?

in

I'm looking at buying a Mossberg International™ 715T (in 22 caliber if your curious) and i love the look of the gun but hate how it does not already posses a flash hider. I expect to see one but don't. After finding out that it's possible i'd like to know how can I. A how-to-video, PDF manual, or any other helpful links are preferred.

Answer: 
From Mossberg's web site, it appears that all of the flat tops have flash hiders. Should have got one of those. You will have to thread the muzzle and the best flash hider to use would be an AR-15 .223 caliber one. I don't recall much muzzle flash from a .22 lr rifle at night so I don't really think you need one. I shot my son's 6" revolver the other night and the muzzle flash with the short barrel was minimal and did not affect my vision.

How to zero in a Gamo silent cat 4x32 scope at around 20 to 30 feet?

in

I want to shoot in my backyard and the range is around 20 to 30 feet. I tried to zero my scope but my pellets always hit low. Even when I turned the elevation dial to the farthest it can go, the pellets still hit in the same place. Please help. Thanks

Answer: 
The reason your still hitting low at 10 yards is because the pellet is still rising towards your line of sight. Try to zero at 25 yards, instead.

How to clean out my mosin nagant after firing corrosive ammo?

in

I plan on buying some surplus ammo and I want to know how to clean my gun after using the ammo. Can someone please give me a step by step process of how to clean out the mosin nagant from using solvents to use of oil. Also can you list what brands you use thanks.

Answer: 
Use Hoppes 9 bore cleaner and clean thoroughly as with any other weapon. Use your choice of weapons oil to lubricate. I use RemOil, but there are several brands. Avoid the use of products not designed for weapons.

How to get better aim when shooting with a bow?

in

I've most of the time been pretty much on when shooting a target with my bow. Is the their any way to get a bullseye every time? Is there a certain way to get better aim when shooting?

Answer: 
* Practice, Practice, Practice.*

How to get a hunting shotgun in Canada without a License?

in

I'm getting my minors hunting and gun license this month, but I need a gun to hunt with. With my minors license I can't buy a shotgun, but I think possession is legal. So if I got one of my parents to buy me a gun at say; Bass pro shop, could they legally do it? Even if it's in my parent's possession could they buy the gun without a license?

Please only people with experience answer.

Answer: 
You need to have a PAL in order to purchse any firearm.

How to maintain my pellet gun and is it build to last?

in

I bought the crosman 1377 pump classic today, and put about 300 pellets through it. Now with the fun out the way i need to know how to maintain it, does the barrel need cleaning? does the gun need any lube? what kind of lube do i need? can i use some WD-40 i got laying around the garage?

P.S. does any one know if this gun is made to last or will fall apart in a week?

Answer: 
The barrel does not need cleaning. You can use a very small amount of WD-40 on the hinge and sliding points of the pump. It will last a few years. Read your owners manual. It will tell you how to maintain it.

How to remove a brand name from a knife?

in

I just bought a Mossberg but I wanna remove the name that's on the blade, how can I do this without messing up the color in that area?

No idea how to categorize this...
I want to remove the letters because I want it to be a clean solid black knife without the lettering on it.

Answer: 
I don't blame you. I wouldn't want any product that says Mossberg on it either. hahhahahaha

Syndicate content